top of page

APPLICATION

  • KristalBond is retrofitted on the interior glass surface. 

  • Best retrofitted after major renovation works prior to installation of windows or door grills or blinds.

  • Scaffolding may be required for glass over 5m high.

flexibility

​KristalBond can be coated seamlessly on:

  • Large glass areas (no size limitation)

  • Curved glass

  • Different shapes

A flexible coating, during application KristalBond can be coated around clamps, bolts and handles. 

SUITABILITY

​KristalBond cannot be coated on:

  • Frosted glass (frosted side)

  • Reflective (mirror) glass (coated side)

  • Low-E glass (coated side)

  • Decorative glass (printed side)

  • Wired glass

APPLICATION METHOD

Picture7.png

Preparing the surface

STEP 1

After protecting the fixed furniture (eg. carpets and cabinets), the glass is thoroughly cleansed several times to rid of dust and oil residues.

Picture8.png

Protecting the Edges

STEP 2

A special tape is used to protect the glass seals and frames from accidental contact with KristalBond’s coat during application.

Picture9.png

Coating KristalBond

STEP 3

Using a special sponge, the coating is applied according to specific coating strokes and techniques.

​

  • 1 hour to be tack free or non-sticky to be touched.

  • 7 days to fully cure and can be cleaned with mild glass cleaner and non-abrasive cloth.

AFTER APPLICATION

MAINTAINING KRISTALBOND COATED GLASS

​

  • Clean your KristalBond coated glass with damp non-abrasive cloth.

bottom of page